|
We
produce custom-made engraving tools following your individual needs. To do so,
we need some information :
Type: |
- Shape: V-shaped, cylindrical, individual
shape?
- Single end or both end
- Halfened or quarter round
- Material
- coating, if desired |
Geometry: |
- Diameter, length, length of halfening
- Reduced shank, if desired
- Reliefed shank, if desired |
Tip: |
- Type of tip
- Relief angle γ
- Clearance angles β und δ
- Width b |
We also produce V-groove cutters from 15° up
to 150° for the circuit board industry.
|