|
|
| GH01.0436
... RH05.0436 / GV01.0436 ... GV03.0436
Ø = 4.36 mm (11/64") Engraving cutters, blanks,
halfened or quarter round. |
 |
Solid
carbide engraving cutters. Blanks, one end or both ends split.
Halfening flat polished. Suitable for Gravograph
engraving systems or compatibles.
If you want us to grind a tip as well (read- to-cut
tool), please order the tip seperately and give us
the geometrical information (see "INFO",
client specific bits).
For general purpose (engraving aluminum, brass, ...,
wood) we recommend a relief angle of 35°, for
engraving plastics (acrylic) 45°, for engraving
stainless steel 20°. |
|
|
|
|
|
|
GH... |
| Halfened |
Code |
Ø |
LH |
L |
| [mm] |
[mm] |
[mm] |
not reliefed |
GH01.0436.165 |
4.36 |
8 |
165 |
| GH01.0436.185 |
8 |
185 |
| GH03.0436.165 |
10 |
165 |
| GH03.0436.185 |
10 |
185 |
| GH05.0436.165 |
15 |
165 |
| GH05.0436.185 |
15 |
185 |
|
|
GV... |
| Quarter
round |
Code |
Ø |
LH |
L |
| [mm] |
[mm] |
[mm] |
not reliefed |
GV01.0436.165
|
4.36 |
8 |
165 |
| GV01.0436.185 |
8 |
185 |
| GV03.0436.165 |
10 |
165 |
| GV03.0436.185 |
10 |
185 |
| GV05.0436.165 |
15 |
165 |
| GV05.0436.185 |
15 |
185 |
|
|
| Code |
Prices
Euro, VAT excl. |
1-4 |
5+ |
10+ |
20+ |
| GH01.0436.165 |
24,75 |
22,75 |
20,80 |
19,80 |
| GH01.0436.185 |
27,15 |
25,00 |
22,80 |
21,70 |
| GH03.0436.165 |
26,75 |
24,60 |
22,45 |
21,40 |
| GH03.0436.185 |
29,15 |
26,80 |
24,50 |
23,30 |
| GH05.0436.165 |
28,75 |
26,45 |
24,15 |
23,00 |
| GH05.0436.185 |
31,15 |
28,65 |
26,15 |
24,90 |
|
| Code |
Prices
Euro, VAT excl. |
1-4 |
5+ |
10+ |
20+ |
| GV01.0436.165 |
29,55 |
27,20 |
24,80 |
23,65 |
| GV01.0436.185 |
31,95 |
29,40 |
26,85 |
25,55 |
| GV03.0436.165 |
32,35 |
29,75 |
27,15 |
25,90 |
| GV03.0436.185 |
34,75 |
31,95 |
29,20 |
27,80 |
| GV05.0436.165 |
35,95 |
33,05 |
30,20 |
28,75 |
| GV05.0436.185 |
38,35 |
35,30 |
32,20 |
30,70 |
|
|
|
Hint: Ready-to-use
engraving bits with other dimensions - or with alternative grinding
specifications (i.e.for engraving stainless steel) - you can combine like this:
1) Raw cutter, i.e. halfened, i.e. GH05.0436.165
2) Grinding the tip, i.e. SF05.0600 (see "Grinding
tips") according to client's specification like
tip angle, relief angles and width.
3) Coating, if desired, i.e. CTIA.1.0600 (see
"Coating"). |
|
|
þ
= Standard article. Always shipped within one week. All prices are
charged with German VAT(19%) if the client resides
within the EC and has no VAT-ID number. |
|
You need bigger quantities? Ask for an individual offer. |
|
|
|
GIS
Gienger Industrie-Service
• Segantinistr. 5 • CH
- 8049 Zurich • Tel. /
Fax +41-(0)44-341 5028 •
mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D -
78532 Tuttlingen • Tel.
+49-(0)7461-162020 • Fax
162021
|
|
|
