HOUSTON plotter blades
GIS Premium Blades
HOUSTON Plotter DMP60, Summagraphics T600-Typen (older models).
|Tangential blade tungsten carbide /
Shank-Ø = 6 mm, L = 14 mm.
|GIS Ref.||Org. Ref.||Angles||Description / application||Prices (€ VAT excluded)|
|α||δ||β||1 - 4||5+||10+||20+|
|MHOU.1036||36||25||54||Tangential blade 36°, Vinyl letters general purpose.||27,50||25,30||18,06||22,00|
|MHOU.1060||60||25||30||Tangential knife 60°, for cutting flock films, sandblasting films, thick, soft, tough material. Also well suited for very small letters.||27,50||25,30||18,06||22,00|
|Please note about
The Houston plotter is a bit outdated and the demand for the blades is accordingly low. This has caused our supplier to stop regular production.
Please contact us anyway, if necessary!
We do not want to leave you out in the rain, because many of these plotters are still working perfectly.
We are currently checking whether we ...
a) if there is sufficient demand, we can have another batch produced... (please get registered as an interested user)
b) or whether we can offer a replacement solution based on an adapter and an insert that we can manufacture in-house. The production from solid carbide would be basically possible with our current equipment, but is VERY complex and therefore unfortunately too expensive for most applications).
|✓ = Standard article. Always available within one week. All prices are charged with German VAT(19%) if the client resides within the EC and has no valid VAT-ID number.|
|You need bigger quantities? Ask for an individual offer.|
GIS Gienger Industrie-Service GmbH
• Max-Eyth-Str. 14 • D - 78194 Immendingen
Tel. +49-(0)7461-1620 20 • Fax. +49-(0)7461-1620 21 • mail: email@example.com • web: www.gis-tec.com
|IMPRINT / DISCLAIMER||PRIVACY NOTICE|