GIS PREMIUM BITS 
    F112                             
    F113                             
    F120                             
    F221                             
    F240                             
    F260                             
    F280                             
      
      
    GIS ECONOMY BITS  
    F041                             
    F048                             
    F126                             
    F225                             
    F246                             
    F247                             
    FG02                             
      
    
     
    GIS SPECIAL BITS
    FV09                             
    FV16 / FV17                 
    FV32                             
    FPLB                             
    
    OTHER TYPES             
    COATINGS                   
    >GIS CMT-BITS...         
 
 
 
 
 
 
 
 
 
 
 
 
  Series FG02

 GIS Economy Bits  

FG02 engraving cutter with drill point

Engraving cutter with drill point, spiralled. Solid tungsten carbide, upcut.

Usually used for routing (isolating) printed circuit boards and drilling the mounting holes at the same pass. Also well suited for engraving stainless steel (!) as well as special sign material such as Gravoply etc. The width (ca. 0.25 ... 0.70 mm) varies with the plunge depth.

This bit is also available with other total length (e.g. 30 or 36 mm) for special engraving systems such as LPKF.

The stopper ring as it is showed in the illustration provides easy tool change without new depth adjustment. Without notice delivery of the tool is without the ring, the ring can be ordered separately (code V900 ..., see accessories ).
Code Ød1 L2 L1 Ød2 Remarks  Prices Euro, VAT excl.
mm mm mm mm 1-4 5+ 10+ 20+
FG02.30.0070 0.25
...
0.70
2 38   12,00 11,05 10,10 9,60
FG02.32.0070 0.25
...
0.70
2 38 3.18    12,00 11,05 10,10 9,60
         Ød2 = shank diameter
  L1 = total length
  L2 = cutting length
  Ød1 = cutting diameter
þ = Standard article. Always shipped within one week.  All prices are charged with German VAT(19%)  if the client resides within the EC and has no VAT-ID number.
You need bigger quantities? Ask for an individual offer.
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021