|
Router bits F247 /
F248 |
GIS Economy Bits |
|
Universal purpose router
bits, two
fluted, tungsten carbide, upcut.
Shank diameter 1/8" (3.175 mm)
Two fluted wide range end mill bit for
hard plastics, hard (short chipping) aluminium alloys and other non-ferrous
metals, wood and wood composites and many more.
Keen straight cutting edges ("Fishtail style");
therefore superb cutting conditions and easy plunge operation into
material with little up to medium strength.
Coating these bits is not economic normally.
NEW:
Router bit series F248: Shorter total length (36 mm)
|
|
F247.0318 |
|
|
|
Code |
Ød1 |
L1 |
LG |
ØS |
Remarks |
Prices
Euro, VAT excl. |
mm |
mm |
mm |
mm |
1-4 |
5+ |
10+ |
20+ |
F247.0050 |
0.50 |
3 |
38 |
3.18 |
|
9,50 |
8,74 |
7,98 |
7,60 |
F247.0050.01 |
0.50 |
1.5 |
extra
short version (rubout bit) |
15,35 |
14,12 |
12,89 |
12,28 |
F247.0060 |
0.60 |
3 |
|
9,50 |
8,74 |
7,98 |
7,60 |
F247.0070 |
0.70 |
3 |
|
F247.0080 |
0.80 |
6 |
|
F247.0090 |
0.90 |
6 |
|
F247.0100
|
1.00 |
6 |
|
F247.0100.02 |
1.00 |
2 |
extra
short version (rubout bit) |
15,35 |
14,12 |
12,89 |
12,28 |
F247.0100.10
|
1.00 |
10.5 |
extra long
version |
12,15 |
11,18 |
10,21 |
9,72 |
F247.0110 |
1.10 |
6 |
|
9,50 |
8,74 |
7,98 |
7,60 |
F247.0120
|
1.20 |
7.5 |
|
F247.0130 |
1.30 |
7.5 |
|
F247.0140 |
1.40 |
7.5 |
|
F247.0150.09 |
1.50 |
9 |
|
F247.0160
|
1.60 |
9 |
|
F247.0170 |
1.70 |
9 |
|
F247.0180 |
1.80 |
9 |
|
F247.0190 |
1.90 |
9 |
|
F247.0200
|
2.00 |
10.5 |
|
F247.0200.12
|
2.00 |
12 |
extra long
version |
12,15 |
11,18 |
10,21 |
9,72 |
F247.0210 |
2.10 |
10.5 |
|
9,50 |
8,74 |
7,98 |
7,60 |
F247.0220 |
2.20 |
10.5 |
|
F247.0230 |
2.30 |
10.5 |
|
F247.0240 |
2.40 |
10.5 |
|
F247.0250
|
2.50 |
10.5 |
|
F247.0300
|
3.00 |
10.5 |
|
F247.0318 |
3.18 |
10.5 |
|
Series
F248 |
Ød1 |
L1 |
LG |
Ød2 |
Shorter total length (36 mm) |
1-4 |
5+ |
10+ |
20+ |
F248.0015 |
0.15 |
0.30 |
36 |
3.18 |
|
36,00 |
33,12 |
30,24 |
28,80 |
F248.0025 |
0.25 |
0.50 |
|
18,00 |
16,56 |
15,12 |
14,40 |
F248.0040 |
0.40 |
1.50 |
|
18,00 |
16,56 |
15,12 |
14,40 |
F248.0200.06 |
2.00 |
6.00 |
|
11,10 |
10,21 |
9,32 |
8,88 |
F248.0300.06 |
2.00 |
6.00 |
|
11,10 |
10,21 |
9,32 |
8,88 |
|
|
|
ØS =
shank diameter |
|
|
|
LG =
total length |
|
|
L1 =
cutting length |
|
Ød1 =
cutting diameter |
= Standard article. Always shipped within one week. All prices are
charged with German VAT(19%) if the client
resides within the EC and has
no VAT-ID number. |
You
need bigger quantities? Ask
for an individual offer. |
|
|
GIS
Gienger Industrie-Service
• Segantinistr. 5 • CH
- 8049 Zürich • Tel. /
Fax +41-(0)44-341 5028 •
mail: info@gis-tec.com
Auslieferungslager EU •
Weimarstr. 15 • D -
78532 Tuttlingen • Tel.
+49-(0)7461-162020 • Fax
162021 |
|