GIS PREMIUM BITS     
    F112                             
    F113 ... F115                
    F120                             
    F215                             
    F221                             
    F240                             
    F260 ... F265                
    F280                             
   
   
    GIS ECONOMY BITS   
    F041                             
    F048                             
    F126                             
    F225                             
    F246                             
    F247 ... F248                
    F261                             
   
   
    GIS PCB BITS              
    FPCB.UC                      
    more...>>>>>                
    GIS SPECIAL BITS      
    FV09                             
    more...>>>>>                
    GIS CMT-BITS             
    C190                             
    more...>>>>>                
    MISCELLANEOUS        
    COATINGS                   
    OTHER TYPES            
   
   
 
 
 
 
 
 
 
 

 Router bits F240

GIS Premium Bits  

F240: Edelstahl-Fräser
 F240.0400.S60

F240: Edelstahl-Fräser mit TiAlN-Beschichtung
 F240.0300.S60.CA

End mill router bits for (stainless) steel: Two straight flutes, tungsten carbide.


Very short and rigid ("stocky") cutting edges with small radial relief lead to high stiffness and stability and little vibrations. As there is no spiral twist the tool has no tendency to lift up the material. Therefore it is especially suitable for routing thin metal sheets.

Beneficial feature: The 45° chamfer between the straight cutting edges and the shank is also relieved, what means that you can cut also with this section. You might use this capability to cut a chamfer or to deburr your workpiece in the same pass or in a second operation.

All common coatings are available. For milling steel TiAlN coating is recommended.
Code Ød1 L1 LG ØS  Remarks  Prices Euro, VAT excl.
mm mm mm mm 1-4 5+ 10+ 20+
F240.0200.S60 2.00 4 40 6   22,00 20,25 18,50 17,60
F240.0200.S60.CA 2.00 4 40 6  TiAlN coated 29,70 27,32 24,95 23,76
F240.0300.S60 3.00 5 40 6   22,00 20,25 18,50 17,60
F240.0300.S60.CA 3.00 5 40 6  TiAlN coated 29,70 27,32 24,95 23,76
F240.0400.S60 4.00 5 40 6   22,00 20,25 18,50 17,60
F240.0400.S60.CA 4.00 5 40 6  TiAlN coated 29,70 27,32 24,95 23,76
                   
additional sizes are planned...                  
                   
        ØS = shank diameter
      LG = total length
    L1 = cutting length
  Ød1 = cutting diameter
= Standard article. Always shipped within one week.  All prices are charged with German VAT(19%)  if the client resides within the EC and has no VAT-ID number.
You need bigger quantities? Ask for an individual offer.
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021