|
|
Router bits FPCB.EM |
GIS PCB Bits |
|
Universal purpose router
bits, end
mill, two
fluted, tungsten carbide, upcut.
Shank diameter 1/8" (3.175 mm).
Two fluted wide range end mill bit for
hard plastics, hard (short chipping) aluminium alloys;
brass and other non-ferrous
metals, wood and
many more.
Keen straight cutting edges ("Fishtail style");
therefore superb cutting conditions and easy plunge operation into
material with little up to medium strength.
Coating these bits is not economic normally.
The stopper
ring as shown
in the
illustration
enables you to
change the
tool without
new depth
adjustment.
The position
of this ring
matches the
standard
defined by the
LPKF ®
system.
|
|
|
|
|
Code |
Ød1 |
L1 |
LG |
ØS |
Remarks |
Prices Euro, VAT excl. |
mm |
mm |
mm |
mm |
1-4 |
5+ |
10+ |
20+ |
FPCB.EM.0100 |
1.00 |
6 |
38 |
3.18 |
|
9,50 |
8,74 |
7,98 |
7,60 |
FPCB.EM.0200 |
2.00 |
9 |
38 |
3.18 |
|
9,50 |
8,74 |
7,98 |
7,60 |
FPCB.EM.0100.R |
1.00 |
6 |
38 |
3.18 |
with
stopper ring (light green) |
10,20 |
9,38 |
8,57 |
8,16 |
FPCB.EM.0200.R |
2.00 |
8.5 |
38 |
3.18 |
with
stopper ring (light green) |
10,20 |
9,38 |
8,57 |
8,16 |
FPCB.EM.dddd |
dddd |
|
38 |
3.18 |
We
produce other dimensions as
well, according to your demand. |
|
|
|
|
|
|
|
|
ØS = shank diameter |
|
|
|
LG = total length |
|
|
L1 = cutting length |
|
Ød1 = cutting diameter |
= Standard article. Always shipped within one week. All prices are
charged with German VAT(19%) if the client
resides within the EC and has no VAT-ID number. |
You
need bigger quantities? Ask
for an individual offer. |
|
|
GIS
Gienger Industrie-Service
• Segantinistr. 5 • CH
- 8049 Zurich • Tel. /
Fax +41-(0)44-341 5028 •
mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D -
78532 Tuttlingen • Tel.
+49-(0)7461-162020 • Fax
162021 |
|
|