ALLEN DATAGRAPH   
    ANA-GRAPH                 
    ARISTO                        
    ENCAD NOVACUT       
    GERBER                      
    GERBER EMBOSS      
    GRAPHTEC                  
    GIS                               
    HOUSTON                    
    IOLINE                         
    KIERNER / DCS            
    KONGSBERG               
    LEICA                           
    MECHATRON               
    MIMAKI                        
    MUTOH                        
    PERICUT                      
    RENKER CSR               
    RENKER ECOM 2        
    ROLAND                       
    SUMMAGRAPHICS      
    WILD TA2... TA100        
    WILD TA30... TA510    
    ZUND                            
    WILD / ZUND SPECIAL
    
     OTHER TYPES           
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 GRAPHTEC GIS Premium Blades  
 All Graphtec, ENCAD NovaCut.
 Drag blade, tungsten carbide with
 cone (steel) and spring
Code Org Ref Angles Description / application  Prices Euro, VAT excl.
α δ β 1-4 5+ 10+ 20+
plotter blades Graphtec CB09-U drag blades MGRA.1045
ž 
CB09-U  45 25 45 Ø = 0.90 mm, l = 19 mm. Offset = 0.45 mm.
Vinyl letters general. Spring included.
27,60 25,39 23,18 22,08
plotter blade Graphtec CB09-U drag blade MGRA.1055
ž
  55 25 35 Like MGRA.1045, enhanced geometry for thick / soft or tough material (Flock, textile, thin cardboard). Spring included. 27,60 25,39 23,18 22,08
plotterblades Graphtec CB15-U dragblades MGRD.1045
ž
  45 30 60 Tungsten carbide with brass sleeve  (spring not included).  
Ø = 1.50 / 2.50 mm, l = 20 mm
Offset = 0.45 mm
Vinyl letters in general.
27,60 25,39 23,18 22,08
plotter blade Graphtec CB15-U-K30 drag knife MGRD.1060
ž
  60 30 30 Tungsten carbide with brass sleeve  (spring not included).
Dimensions like MGRD.1045.
Offset = 0.70 mm.
For thick / soft or tough material (Flock, textile, cardboard).
27,60 25,39 23,18 22,08
Spring for Graphtec exchange blades MGRD.0999
ž
        Spring for MGRD blades  0,18 0,17 0,15 0,14
bladeholder Graphtec für dragged blades 0.90 mm MGRA.0500
ž
similar
PHP32-09
      Blade holder for 0.90 mm blades MGRA... Blade fixation: Spring forces cone into rear bearing. 92,80 85,38 77,95 74,24
knifeholder Graphtec for 1.50 mm dragblades MGRD.0500
ž
similar
PHP32-09
      Blade holder for 1.50 mm Messer MGRD... Blade fixation: Spring forces cone into rear bearing. 92,80 85,38 77,95 74,24
blades for Graphtec plotter
Craft Robo.
Code Org Ref   Description / application  
α δ β 1-4 5+ 10+ 20+
plotter blade Graphtec Craft Robo MGRC.1045   45 25 45 Ø = 0.90 mm, l = 17 mm.
Offset = 0.45 mm.
General purpose.
       
Blade holder for Graphtec Craft Robo MGRC.0500         Blade holder for 0.90 mm plotterblades MGRC... Blade fixation: Clamping mechanism.        
Caution: Blades MGRC...  fit ONLY into OUR blade holder MGRC.0500. Only this combination can be used within the Craft Robo plotter. According to our information Graphtec does not offer any replaceable exchange blades yet, but a unit consisting of a holder and a blade that cannot be separated.
ž = Standard article. Always shipped within one week.  All prices are charged with German VAT(19%)  if the client resides within the EC and has no VAT-ID number.
You need bigger quantities? Ask for an individual offer.
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021