ALLEN DATAGRAPH   
    ANA-GRAPH                 
    ARISTO                        
    ENCAD NOVACUT       
    GERBER                      
    GERBER EMBOSS      
    GRAPHTEC                  
    GIS                               
    HOUSTON                    
    IOLINE                         
    KIERNER / DCS            
    KONGSBERG               
    LEICA                           
    MECHATRON               
    MIMAKI                        
    MUTOH                        
    PERICUT                      
    RENKER CSR               
    RENKER ECOM 2        
    ROLAND                       
    SUMMAGRAPHICS      
    WILD TA2... TA100        
    WILD TA30... TA510    
    ZUND                            
    WILD / ZUND SPECIAL
    
     OTHER TYPES           
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 ARISTO GIS Premium Blades  
 all Aristo Plotters (including Aristomat, Liberty).
Tangential blade, solid tungsten carbide
Ø = 3 mm, l = 26.5 mm.
Code Org Ref Angles Description / application Prices Euro, VAT excl.
α δ β 1-4 5+ 10+ 20+
plotter blade Aristo 35° single edge MARI.1035
þ
7131
35 40 55 General purpose vinyl cutting.
18,00 16,55 15,10 14,40
plotter blades Aristo 60° single edge MARI.1060   60 22 30 For thick, soft or tough Material (e.g. flock sheets)  23,10 21,25 19,40 18,50
plotter blade Aristo 35° double edge MARI.2035
þ
  35 40 120 General purpose vinyl cutting.
18,00 16,55 15,10 14,40
plotter blade Aristo 60° double edge MARI.2060   60 22 60 For very thick, soft or tough Material (e.g. sandblast foil, keyboard foil, spacers)  23,10 21,25 19,40 18,50
Please note: The tangential blades MARI.1060 and MARI.2060 have been especially developed to enable the use of Aristo plotters for extremely thick and / or tough materials. Due to the extreme slim geometry that was necessary to achieve this no big endurance can be expected. Therefore we do not make any assurances towards cutting results or lifetime of these articles.
For oscillating cutting device
shank-Ø = 6 mm
Code Org Ref   Description / application  
α δ β 1-4 5+ 10+ 20+
Oscillating blade Aristo 6 mm cutting depth MARO.1006 7275
      cutting depth ca. 6 mm,
total length 36 mm
42,05 38,70 35,30 33,65
Oscillating blade Aristo 10 mm cutting depth MARO.1010 7267
      cutting depth ca. 10 mm 42,05 38,70 35,30 33,65
Oscillating blade Aristo 15 mm cutting depth MARO.1015 7265
      cutting depth ca. 15 mm 42,05 38,70 35,30 33,65
Oscillating blade Aristo 25 mm cutting depth MARO.1025 7268
      cutting depth ca. 25 mm. total length ca. 46 mm

66,70 61,35 56,05 53,35
Aristo Oscillating blade 35 mm. Image follows soon... MARO.8.1035
      cutting depth ca. 35 mm. total length  ca. 50 mm
shank diameter 8 mm
97,20 89,42 81,65 77,76
Aristo Oscillating blade 38 mm. Image follows soon... MARO.8.1038
      cutting depth ca. 35 mm. total length  ca. 50 mm
shank diameter 8 mm
102,60 94,39 86,18 82,08
Aristo Oscillating blade 44 mm. Image follows soon... MARO.8.1044
      cutting depth ca. 35 mm. total length  ca. 50 mm
shank diameter 8 mm
118,80 109,30 99,79 95,04
þ = Standard article. Always shipped within one week.  All prices are charged with German VAT(19%)  if the client resides within the EC and has no VAT-ID number.
You need bigger quantities? Ask for an individual offer.
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021