STANDARD BITS 
    Ø 3 mm                        
    Ø 4 mm                        
    Ø 6 mm                        
    Ø 1/8" (3.18 mm)         
    OTHER Ø                     
    "BOX BITS"                  
    PARALLEL BITS            
    SPECIAL SHAPES         
   
    "GRAVO"-TYPES  
    Ø 3.18 * 105 ... 130      
    Ø 4.36 * 155 ... 185      
    
    SERVICE   
    GRINDING TIPS           
    COATING                     
    
    
    
      
    
     
    
    
    
    
    
    
    
 
 
 
 
 
 
 
 
 
 
 
 
 GH01.0318 ... GH05.0318 / GH02.0318 ... GH06.0318        Ø=1/8" = 3.175 mm.  Blanks, halfened.
Engraving bit, blank, halfened
Solid carbide engraving cutters. Blanks, one end or both ends split. Halfening flat polished.
Engraving tool, single end split:
GH01: split length = 1.5 * D
GH03: split length = 2 * D
GH05: split length = 3 * D
(D = diameter)
Engraving tools, both ends split:
GH02: split length = 1.5 * D
GH04: split length = 2 * D
GH06: split length = 3 * D
  GH01.0318...   GH03.0318...   GH05.0318...   GH02.0318...   GH04.0318...   GH06.0318...
Engraving bit, short halfening Engraving bit, medium halfening Engraving bit, long halfening Engraving bit, short halfening, both ends split Engraving bit, medium halfening, both ends split Engraving bit, long halfening, both ends split
 Code  Code  Code  Code  Code  Code
 GH01.0318.038   GH03.0318.038   GH05.0318.038   GH02.0318.038   GH04.0318.038   - 
 GH01.0318.040   GH03.0318.040   GH05.0318.040   GH02.0318.040   GH04.0318.040   - 
 GH01.0318.050  GH03.0318.050  GH05.0318.050  GH02.0318.050  GH04.0318.050  GH06.0318.050
 GH01.0318.075  GH03.0318.075  GH05.0318.075  GH02.0318.075  GH04.0318.075  GH06.0318.075

Material: All cutters with total length 38 mm: ATX11, a sub-micrograin material used in pcb cutter industry. Unequalled toughness.

Other dimensions: K40, made in Germany, a superb material for general purposes. Other grades available on request.
How to read the code:   GH0n.0300.LLL
GH01...GH06    Type of cutter (see above)
0300   diameter (3.00 mm)
LLL   Total length of cutter

Other dimensions are available on request.
 Code

Prices Euro, VAT excl. 

1-4 5+ 10+ 20+
 GH01.0318.038        
 GH01.0318.040             
 GH01.0318.050        
 GH01.0318.075        
 Code

Prices Euro, VAT excl. 

1-4 5+ 10+ 20+
 GH01.0318.038        
 GH01.0318.040             
 GH01.0318.050        
 GH01.0318.075        
 
Hint: Ready-to-use engraving bits with other dimensions - or with alternative grinding specifications (i.e.for engraving steel) - you can combine like this:
1) Raw cutter, i.e. halfened, i.e. GH01.0300.040
2) Grinding the tip, i.e. SF05.0300 (see "Grinding tips") according to client's specification like tip angle, relief angles and width.
3) Coating, if desired, i.e. CTIA.1.0300 (see "Coating").

þ = Standard article. Always shipped within one week.  All prices are charged with German VAT(19%) if the client resides
within the EC and has no VAT-ID number.

You need bigger quantities? Ask for an individual offer.

 
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021